Products

164 products

164 products

Quick view
Flashing STM8
$300
Quick view
Frequency Counter Integration
$5,500
Quick view
Getting Started Kit
$3,078
Quick view
HD-78 Male-to-Male Cable
$59
Quick view
High Current Test Probe Integration
$130
Quick view
High Pin Count Accommodation
$500
Quick view
High Voltage DC Load Test Integration
$1,000
Quick view
I2C Interface Testing
$250
Quick view
ICT Breakout Board
$59
Quick view
ICT Fixture Chassis for A4 Pogo Pin Cassettes
$999
Quick view
ICT Fixture Chassis for A5 Pogo Pin Cassettes
$799
Quick view
Indicator LED Integration
$80
Quick view
Ingun ATS MA12 Removable Pogo Pin Cassette Kit - Unassembled
$1,000
Quick view
Ingun MA 2113 A3 ICT Chassis
$3,000
Quick view
Integrated Barcode Scanner
$250
Quick view
Intel x86 SBC Integration with Linux
$1,550
Quick view
Intel x86 SBC Integration with Windows
$1,600
Quick view
Interface with Complex DUT Connector
$1,800
Quick view
Interface with Nonstandard Test Points
$650
Quick view
IR Beam Light Pipe with Actuated Interrupter
$3,300
Quick view
JS220 Power Analyzer Integration
$2,300

Flashing STM8

SKU: 2202

$300
/

Flashing the devices in the STMicroelectronics STM8 family generally benefit from additional hardware in or near the Pogo Pin Cassette. Generally we incorporate a single-board computer and an STLINK for improved signal integrity. This add-on supports the SWIM protocol.

 

Frequency Counter Integration

SKU: 0038

$5,500
/

To support RTC calibration and other tests, you can add a third-party frequency counter to the test station.

Getting Started Kit

Getting Started Kit

SKU: FW-KIT

$3,078
/

The Getting Started Kit is the ideal place to start familiarizing yourself with the capabilities of the PLT. It allows you to develop and refine test plans for your hardware before your board is ready for mass production. Simply connect the 3 cables to the PLT Breakout Board and use jumper wires to connect to your hardware. This gives you confidence in your design of the pogo pin cassette when you are ready to lock down your hardware design for production. 

This kit contains the following:

  • PLT-300A
  • PLT Breakout Board
  • PLT Cable Pack (8-Wire Power Cable, HD78 Cable, USB-C Cable)
HD-78 Male-to-Male Cable

HD-78 Male-to-Male Cable

SKU: 2099

$59
/
HD-78 Male-to-Male Cable, 762mm length.
This cable provides substantial I/O between the Production Line Tool and the device under test.


High Current Test Probe Integration

SKU: 2064

$130
/
To supply higher current to the device under test, thicker test probes can be added to the pogo pin cassette. The price shown is per pin.

High Pin Count Accommodation

SKU: 2097

$500
/

Some boards have many test points and require more pogo pins. Adding more pins to a pogo pin cassette requires more engineering, assembly labor, and materials. For designs with more than 50 pins, this item is added for each additional 50 pins in the design.

1 ~ 50 pins = 0 extra, included in standard PPC
51 ~ 100 pins = 1 accommodation
101 ~ 150 pins = 2 accommodations
151 ~ 200 pins = 3 accommodations
201 ~ 250 pins = 4 accommodations

 

High Voltage DC Load Test Integration

SKU: 0027

$1,000
/
Integration of a programmable DC load into a Pogo Pin Cassette.

I2C Interface Testing

SKU: 2162

$250
/
Serial interaction over an I2C bus with components in the DUT or Pogo Pin Cassette.
ICT Breakout Board

ICT Breakout Board

SKU: 2102

$59
/
This breakout board allows easier access to the HD78 connector pins used on both the PLT and the pogo pin cassettes.

ICT Fixture Chassis for A4 Pogo Pin Cassettes

SKU: 2101

$999
/
Chassis designed to fit larger pogo pin cassettes for larger PCBAs. Maximum board size for this family is A4 (210mm x 297mm) / (8.3 x 11.7 inches).

ICT Fixture Chassis for A5 Pogo Pin Cassettes

SKU: 2100

$799
/
The ICT-100A is a box with vertical arms supporting a toggle clamp.
To perform in-circuit testing on a customized Printed Circuit Board (PCB), the ICT-100A hosts a custom-built Pogo Pin Cassette (PPC).

This is our most popular chassis and supports boards up to A5 (148mm x 210mm) in size.

Indicator LED Integration

SKU: 2143

$80
/
Addition of indicator LED to Pogo Pin Cassette.

Ingun ATS MA12 Removable Pogo Pin Cassette Kit - Unassembled

SKU: 2132

$1,000
/
Ingun ATS MA12 removable pogo pin cassette with 285mm x 240mm testable area. This kit requires additional hardware and assembly to be usable with a device under test. Fits inside the MA 2112 chassis.

Ingun MA 2113 A3 ICT Chassis

$3,000
/

Ingun MA 2113 test fixture base, including assembly.

Base is designed to hold ATS MA13 removable pogo pin cassettes with a testable area of 310mm x 440mm (roughly A3 size).

Integrated Barcode Scanner

SKU: 2188

$250
/

USB scanner for 1D/2D codes. Tested to work with the Production Line Tool.

Intel x86 SBC Integration with Linux

SKU: 2095

$1,550
/
Intel x86 single board computer integration with Linux pre-installed.

Intel x86 SBC Integration with Windows

SKU: 2089

$1,600
/
Intel x86 single board computer integration with Windows pre-installed.

Interface with Complex DUT Connector

SKU: 2075

$1,800
/
Interface with complex DUT connector

Interface with Nonstandard Test Points

SKU: 2074

$650
/
If possible, place test points on the bottom of the PCBA with a diameter of 1mm and separation of centers of at least 2mm. If they need to be smaller or closer together, this can be accommodated with this additional service. This also allows for interfacing with the pins of thru-hole components using special pogo pin heads.

IR Beam Light Pipe with Actuated Interrupter

SKU: 2140

$3,300
/
Assembly of light pipes between an IR emitter and IR detector with an actuated flag that interrupts the beam. This test is used to validate a motion sensing system.
JS220 Power Analyzer Integration

JS220 Power Analyzer Integration

SKU: 1101

$2,300
/
Integration of high-precision Joulescope model JS220 into Pogo Pin Cassette.