Integration of 5.5-digit digital multimeter into Pogo Pin Cassette. This brings the measurement hardware even closer to your device for improved accuracy.
BLE module is incorporated into a fixed position in the Pogo Pin Cassette to provide production tests of the BLE radio in the DUT. Shielding is not included.
With test points on your Ethernet lines, pogo pins are routed to an Ethernet-enabled device in the Pogo Pin Cassette to test your device's Ethernet communication paths. Speeds may be limited by the use of pogo pin test probes.
Integration of 6.5-digit digital multimeter into Pogo Pin Cassette. This brings the measurement hardware even closer to your device for improved accuracy.
Includes LED sensing hardware, design, and integration into a pogo pin cassette. Assumes all LEDs are on the same side of the PCBA. Analyzer outputs a voltage that indicates the color and brightness of the LED. Price shown is per LED.
Microphone testing performed with a USB speaker connected to a single board computer (SBC) in the Pogo Pin Cassette. This requires the addition of an SBC as well. Sound isolation of the device under test is not included.
Sometimes it is useful to include one of the other PCBAs from a design inside the test fixture to verify interoperability. The price shown is the amount per inter-board connector. This does not include the cost of the sample board.
With a signal generator integrated into the pogo pin cassette, you can use triangle, square, or sine waves to exercise your device. This simple version is limited to 1kHz frequencies.
Test Sub-1 GHz RF transmissions used in certain automotive applications. For example, many keyfob entry systems utilize 315MHz or 433MHz transmissions. Generally this is implemented by incorporating TI LAUNCHXL-CC1310 into a Pogo Pin Cassette.
