PLT Tech Specs

The Production Line Tool (PLT) streamlines firmware flashing and test automation during production.

With the PLT, you can spend less time worrying about logistics and more time writing firmware.

General Specification

MCU Support

The PLT can be used to program/flash on-board MCU or MCU RAM. Programming can be done via SWD, ISP, UART, or JTAG.

For a complete list of supported MCUs, please consult the PLT support center. We are constantly expanding the list, and we would be happy to take a look at your product.

Power and Relays

Power Control
The PLT-200A can power the device under test with either 3.3, 5, or 12 Volts at up to 2 Amps. The voltage and current provided to the PLT can be measured during test plan execution.

Short Control

The PLT-200A can short a test pin with ground, VDD, or another test pin.

Electrical Measurements

The PLT-200A can perform several electrical measurements of up to 45 analog test points.

Logic Measurements

The PLT-200A can measure and test up to 48 logic test points.

UART Testing

The PLT-200A allows testing UART interactions with the DUT, at speeds up to 1 Mbps.

Speed: 300bps - 1 MbpsFlow
Control: Xon/Xoff, DTR/CTS

Bluetooth LE (BLE) Testing

The PLT-200A allows testing Bluetooth Low Energy (BLE) interactions with the DUT.

CAN Bus Testing

The PLT-200A allows testing CAN interactions with the DUT, at speeds up to 1 Mbps.

WiFi Testing

The PLT-200A allows testing 2.4GHz WiFi interactions with the DUT.

Barcode Scanning

The PLT-200A allows barcodes, such as EAN-13, QR, Code 128, and UPC, to be scanned using a USB-attached barcode scanner.


The PLT contains a Secure Element to protect the integrity of the deployment process.

NIST Standard P256 Elliptic Curve

All Cloud communication, including deploying firmware and reporting of test results, are protected using TLS1.2 mutual authentication.

Label printing

The PLT-200A allows labels to be printed using a USB-attached label printer.